In response to hackajar <matt> yahoo <trot> com,
No string-to-array function exists because it is not needed. If you reference a string with an offset like you do with an array, the character at that offset will be return. This is documented in section III.11's "Strings" article under the "String access and modification by character" heading.
Funções de String
Veja Também
Para funções de manipulação de string mais poderosas, veja as funções de expressões regulares estilo Perl. Para trabalhar com strings com codificação multibyte, veja as funções Multibyte String.
Índice
- addcslashes — String entre aspas com barras no estilo C
- addslashes — Adiciona barras a uma string
- bin2hex — Converte um dado binário em representação hexadecimal
- chop — Sinônimo de rtrim
- chr — Retorna um caracter específico
- chunk_split — Divide uma string em pequenos pedaços
- convert_cyr_string — Converte de um conjunto caracteres cirílico para outro
- convert_uudecode — Decodifica uma string codificada com uuencode
- convert_uuencode — Codifica com uuencode uma string
- count_chars — Retorna informações sobre os caracteres usados numa string
- crc32 — Calcula polinômio crc32 de uma string
- crypt — Encriptação unidirecional de string (hashing)
- echo — Exibe uma ou mais strings
- explode — Divide uma string em strings
- fprintf — Escreve uma string formatada para um stream
- get_html_translation_table — Retorna a tabela de tradução usada por htmlspecialchars e htmlentities
- hebrev — Converte texto lógico Hebraico para texto visual
- hebrevc — Converte um texto lógico Hebráico para um texto visual com conversão newline
- hex2bin — Decodes a hexadecimally encoded binary string
- html_entity_decode — Converte todas as entidades HTML para os seus caracteres
- htmlentities — Converte todos os caracteres aplicáveis em entidades html.
- htmlspecialchars_decode — Converte especiais entidades HTML para caracteres
- htmlspecialchars — Converte caracteres especiais para a realidade HTML
- implode — Junta elementos de uma matriz em uma string
- join — Sinônimo de implode
- lcfirst — Torna minúsculo o primeiro caractere de uma string
- levenshtein — Calcula a distância Levenshtein entre duas strings
- localeconv — Obtém a informação da formatação numérica
- ltrim — Retira espaços em branco (ou outros caracteres) do início da string
- md5_file — Calcula hash md5 de um dado arquivo
- md5 — Calcula o "hash MD5" de uma string
- metaphone — Calcula a metaphone key de uma string
- money_format — Formata um número como uma string de moeda
- nl_langinfo — Retorna informação de linguagem e local
- nl2br — Insere quebras de linha HTML antes de todas newlines em uma string
- number_format — Formata um número com os milhares agrupados
- ord — Retorna o valor ASCII do caractere
- parse_str — Converte a string em variáveis
- print — Mostra uma string
- printf — Mostra uma string formatada
- quoted_printable_decode — Converte uma string quoted-printable para uma string de 8 bit
- quoted_printable_encode — Converte uma string de 8 bits em uma string quoted-printable
- quotemeta — Adiciona uma barra invertida antes dos meta caracteres
- rtrim — Retira espaço em branco (ou outros caracteres) do final da string
- setlocale — Define informações locais
- sha1_file — Calcula a hash sha1 de um arquivo
- sha1 — Calcula a hash sha1 de uma string
- similar_text — Calcula a similaridade entre duas strings
- soundex — Calcula a chave soundex de uma string
- sprintf — Retorna a string formatada
- sscanf — Interpreta a entrada de uma string de acordo com um formato
- str_contains — Determine if a string contains a given substring
- str_ends_with — Checks if a string ends with a given substring
- str_getcsv — Analisa uma string CSV e retorna os dados em um array
- str_ireplace — Versão que não diferencia maiúsculas e minúsculas de str_replace.
- str_pad — Preenche uma string para um certo tamanho com outra string
- str_repeat — Repete uma string
- str_replace — Substitui todas as ocorrências da string de procura com a string de substituição
- str_rot13 — Executa a transformação rot13 em uma string
- str_shuffle — Mistura uma string aleatoriamente
- str_split — Converte uma string para um array
- str_starts_with — Checks if a string starts with a given substring
- str_word_count — Retorna informação sobre as palavras usadas em uma string
- strcasecmp — Comparação de strings sem diferenciar maiúsculas e minúsculas segura para binário
- strchr — Sinônimo de strstr
- strcmp — Comparação de string segura para binário
- strcoll — Comparação de string baseada no local
- strcspn — Encontra o tamanho do segmento inicial que não contenha a máscara
- strip_tags — Retira as tags HTML e PHP de uma string
- stripcslashes — Desfaz o efeito de addcslashes
- stripos — Encontra a primeira ocorrencia de uma string sem diferenciar maiúsculas e minúsculas
- stripslashes — Desfaz o efeito de addslashes
- stristr — strstr sem diferenciar maiúsculas e minúsculas
- strlen — Retorna o tamanho de uma string
- strnatcasecmp — Comparação de strings sem diferenciar maiúsculas/minúsculas usando o algoritmo "natural order"
- strnatcmp — Comparação de strings usando o algoritmo "natural order"
- strncasecmp — Comparação de string caso-sensitivo de Binário seguro dos primeiros n caracteres
- strncmp — Comparação de string segura para binário para os primeiros n caracteres
- strpbrk — Procura na string por um dos caracteres de um conjunto
- strpos — Encontra a posição da primeira ocorrência de uma string
- strrchr — Encontra a ultima ocorrência de um caractere em uma string
- strrev — Reverte uma string
- strripos — Encontra a posição da última ocorrência de uma string case-insensitive em uma string
- strrpos — Encontra a posição da última ocorrência de um caractere em uma string
- strspn — Encontra o comprimento do segmento inicial combinando com a máscara
- strstr — Encontra a primeira ocorrencia de uma string
- strtok — Tokeniza uma string
- strtolower — Converte uma string para minúsculas
- strtoupper — Converte uma string para maiúsculas
- strtr — Traduz certos caracteres
- substr_compare — A comparação binária entre duas strings de um offset até o limite do comprimento de caracteres
- substr_count — Conta o número de ocorrências de uma substring
- substr_replace — Substitui o texto dentro de uma parte de uma string
- substr — Retorna uma parte de uma string
- trim — Retira espaço no ínicio e final de uma string
- ucfirst — Converte para maiúscula o primeiro caractere de uma string
- ucwords — Converte para maiúsculas o primeiro caractere de cada palavra
- vfprintf — Escreve uma string formatada para um stream
- vprintf — Mostra uma string formatada
- vsprintf — Retorna uma string formatada
- wordwrap — Quebra uma string em um dado número de caracteres
add a note
User Contributed Notes 23 notes
Anonymous ¶
19 years ago
t0russ at gmail dot com ¶
18 years ago
to kristin at greenaple dot on dot ca:
thanx for sharing.
your function in recursive form proved to be slightly faster and it returns false (as it should) when the character is not found instead of number 0:
<?php
function strnposr($haystack, $needle, $occurance, $pos = 0) {
return ($occurance<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurance-1,strpos($haystack, $needle, $pos) + 1);
}
?>
navarr at gmail dot com ¶
18 years ago
stripos for PHP4.x
<?php
function stripos($haystack,$needle) {
return strpos(strtoupper($haystack),strtoupper($needle));
}
?>
Verdauga ¶
16 years ago
Just a note in regards to bloopletech a few posts down:
The word "and" should not be used when converting numbers to text. "And" (at least in US English) should only be used to indicate the decimal place.
Example:
1,796,706 => one million, seven hundred ninety-six thousand, seven hundred six.
594,359.34 => five hundred ninety four thousand, three hundred fifty nine and thirty four hundredths
andy a t onesandzeros d o t biz ¶
19 years ago
I use these little doo-dads quite a bit. I just thought I'd share them and maybe save someone a little time. No biggy. :)
// returns true if $str begins with $sub
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) == $sub );
}
// return tru if $str ends with $sub
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) == $sub );
}
// trims off x chars from the front of a string
// or the matching string in $off is trimmed off
function trimOffFront( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, $off );
else
return substr( $str, strlen( $off ) );
}
// trims off x chars from the end of a string
// or the matching string in $off is trimmed off
function trimOffEnd( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, 0, strlen( $str ) - $off );
else
return substr( $str, 0, strlen( $str ) - strlen( $off ) );
}
admin at fivestarbuy dot com ¶
18 years ago
This example lets you parse an unparsed strings variables. Warning: This could cause security leaks if you allow users to pass $variables through this engine. I recommend only using this for your Content Management System.
<?
$mytime=time();
$mydog="My Dog Ate My PHP!";
# Your Parsing String:
$s1 = 'Hyphen Variable Preserving: $mytime, and $mydog';
echo "Before: <br><br>$s1<br><br>";
# Remember, wherever you define this, it will not be defined GLOBAL into the function
# which is why we define it here. Defining it global could lead to security issues.
$vardata=get_defined_vars();
# Parse the string
$s1 = StrParse($s1,$vardata);
echo "After: <br><br>$s1";
function StrParse($str,$vardata) {
# Takes a string, or piece of data, that contains PHP Variables
# For example, unparsed variables like: Test using time: $mytime
# This example shows $mytime, and not the actual variable value.
# The end result shows the actual variable value of $mytime.
# This is useful for building a content management system,
# and directing your variables into your content data,
# where content is stored in a file or database, unparsed.
# Of course this could slow down page loads, but it's a good way
# to parse data from current variables into your loaded new data
# making it compatible.
# Then the variables are replaced with the actual variable..
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
SteveRusin ¶
18 years ago
The functions below:
function beginsWith( $str, $sub )
function endsWith( $str, $sub )
Are correct, but flawed. You'd need to use the === operator instead:
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) === $sub );
}
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) === $sub );
}
Otherwise, endsWith would return "foobar.0" ends with ".0" as well as "0" or "00" or any amount of zeros because numerically .0 does equal 0.
Anonymous ¶
18 years ago
to: james dot d dot baker at gmail dot com
PHP has a builtin function for doing what your function does,
http://php.net/ucfirst
http://php.net/ucwords
Pommef ¶
19 years ago
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
function strnpos($haystack, $needle, $occurance, $pos = 0) {
$res = implode($needle,$haystack);
$res = array_slice($res, $pos, $occurance);
return explode ($needle,$res);
}
?>
str at maphpia dot com ¶
10 years ago
I was looking for a function to find the common substring in 2 different strings. I tried both the mb_string_intersect and string_intersect functions listed here but didn't work for me. I found the algorithm at http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP so here I post you the function
<?php
/**
* Finds the matching string between 2 strings
*
* @param string $string1
* @param string $string2
* @param number $minChars
*
* @return NULL|string
*
* @link http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP
*/
function string_intersect($string_1, $string_2)
{
$string_1_length = strlen($string_1);
$string_2_length = strlen($string_2);
$return = "";
if ($string_1_length === 0 || $string_2_length === 0) {
// No similarities
return $return;
}
$longest_common_subsequence = array();
// Initialize the CSL array to assume there are no similarities
for ($i = 0; $i < $string_1_length; $i++) {
$longest_common_subsequence[$i] = array();
for ($j = 0; $j < $string_2_length; $j++) {
$longest_common_subsequence[$i][$j] = 0;
}
}
$largest_size = 0;
for ($i = 0; $i < $string_1_length; $i++) {
for ($j = 0; $j < $string_2_length; $j++) {
// Check every combination of characters
if ($string_1[$i] === $string_2[$j]) {
// These are the same in both strings
if ($i === 0 || $j === 0) {
// It's the first character, so it's clearly only 1 character long
$longest_common_subsequence[$i][$j] = 1;
} else {
// It's one character longer than the string from the previous character
$longest_common_subsequence[$i][$j] = $longest_common_subsequence[$i - 1][$j - 1] + 1;
}
if ($longest_common_subsequence[$i][$j] > $largest_size) {
// Remember this as the largest
$largest_size = $longest_common_subsequence[$i][$j];
// Wipe any previous results
$return = "";
// And then fall through to remember this new value
}
if ($longest_common_subsequence[$i][$j] === $largest_size) {
// Remember the largest string(s)
$return = substr($string_1, $i - $largest_size + 1, $largest_size);
}
}
// Else, $CSL should be set to 0, which it was already initialized to
}
}
// Return the list of matches
return $return;
}
[tab!] ¶
19 years ago
//
// string strtrmvistl( string str, [int maxlen = 64],
// [bool right_justify = false],
// [string delimter = "<br>\n"])
//
// splits a long string into two chunks (a start and an end chunk)
// of a given maximum length and seperates them by a given delimeter.
// a second chunk can be right-justified within maxlen.
// may be used to 'spread' a string over two lines.
//
function strtrmvistl($str, $maxlen = 64, $right_justify = false, $delimter = "<br>\n") {
if(($len = strlen($str = chop($str))) > ($maxlen = max($maxlen, 12))) {
$newstr = substr($str, 0, $maxlen - 3);
if($len > ($maxlen - 3)) {
$endlen = min(($len - strlen($newstr)), $maxlen - 3);
$newstr .= "..." . $delimter;
if($right_justify)
$newstr .= str_pad('', $maxlen - $endlen - 3, ' ');
$newstr .= "..." . substr($str, $len - $endlen);
}
return($newstr);
}
return($str);
}
Stephen Dewey ¶
15 years ago
If you want a function to return all text in a string up to the Nth occurrence of a substring, try the below function.
Works in PHP >= 5.
(Pommef provided another sample function for this purpose below, but I believe it is incorrect.)
<?php
// Returns all of $haystack up to (but excluding) the $n_occurrence occurrence of $needle. Therefore:
// If there are < $n_occurrence occurrences of $needle in $haystack, the entire string will be returned.
// If there are >= $n_occurrence occurrences of $needle in $haystack, the returned string will end before the $n_occurrence'th needle.
// This function only makes sense for $n_occurrence >= 1
function nsubstr($needle, $haystack, $n_occurrence)
{
// After exploding by $needle, every entry in $arr except (possibly) part of the last entry should have its content returned.
$arr = explode($needle,$haystack,$n_occurrence);
// Examine last entry in $arr. If it contains $needle, cut out all text except for the text before $needle.
$last = count($arr) - 1;
$pos_in_last = strpos($arr[$last],$needle);
if ($pos_in_last !== false)
$arr[$last] = substr($arr[$last],0,$pos_in_last);
return implode($needle,$arr);
}
$string = 'd24jkdslgjldk2424jgklsjg24jskgldjk24';
print 'S: ' . $string . '<br>';
print '1: ' . nsubstr('24',$string,1) . '<br>';
print '2: ' . nsubstr('24',$string,2) . '<br>';
print '3: ' . nsubstr('24',$string,3) . '<br>';
print '4: ' . nsubstr('24',$string,4) . '<br>';
print '5: ' . nsubstr('24',$string,5) . '<br>';
print '6: ' . nsubstr('24',$string,6) . '<br>';
print '7: ' . nsubstr('24',$string,7) . '<br>';
/*
// prints:
S: d24jkdslgjldk2424jgklsjg24jskgldjk24
1: d
2: d24jkdslgjldk
3: d24jkdslgjldk24
4: d24jkdslgjldk2424jgklsjg
5: d24jkdslgjldk2424jgklsjg24jskgldjk
6: d24jkdslgjldk2424jgklsjg24jskgldjk24
7: d24jkdslgjldk2424jgklsjg24jskgldjk24
*/
?>
Note that this function can be combined with wordwrap() to accomplish a routine but fairly difficult web design goal, namely, limiting inline HTML text to a certain number of lines. wordwrap() can break your string using <br>, and then you can use this function to only return text up to the N'th <br>.
You will still have to make a conservative guess of the max number of characters per line with wordwrap(), but you can be more precise than if you were simply truncating a multiple-line string with substr().
See example:
<?php
$text = 'Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida accumsan, enim quam condimentum est, vitae rutrum neque magna ac enim.';
$wrapped_text = wordwrap($text,100,'<br>',true);
$three_lines = nsubstr('<br>',$wrapped_text,3);
print '<br><br>' . $three_lines;
$four_lines = nsubstr('<br>',$wrapped_text,4);
print '<br><br>' . $four_lines;
/*
prints:
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida
*/
?>
kristin at greenapple dot on dot ca ¶
19 years ago
I really searched for a function that would do this as I've seen it in other languages but I couldn't find it here. This is particularily useful when combined with substr() to take the first part of a string up to a certain point.
strnpos() - Find the nth position of needle in haystack.
<?php
function strnpos($haystack, $needle, $occurance, $pos = 0) {
for ($i = 1; $i <= $occurance; $i++) {
$pos = strpos($haystack, $needle, $pos) + 1;
}
return $pos - 1;
}
?>
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
$root_dir = substr($haystack, 0, strnpos($haystack, $needle, 4));
echo $root_dir;
?>
Returns: /home/username/www
Use this example with the server variable $_SERVER['SCRIPT_NAME'] as the haystack and you can self-discover a document's root directory for the purposes of locating global files automatically!
php at moechofe dot com ¶
19 years ago
<?php
/*
* str_match
*
* return a string with only cacacteres defined in a expression return false if the expression is not valid
*
* @param $str string the string
* @param $match the expression based on the class definition off a PCRE regular expression.
* the '[', ']', '\' and '^' at class start need to be escaped.
* like : -a-z0-9_@.
*/
function str_match( $str, $match )
{
$return = '';
if( eregi( '(.*)', $match, $class ) )
{
$match = '['.$regs[1].']';
for( $i=0; $i<strlen($str); $i++ )
if( ereg( '['.$class[1].']', $str[$i] ) )
$return .= $str{$i};
return $return;
}
else return false;
}
/*
* example
* accept only alphanum caracteres from the GET/POST parameters 'a'
*/
if( ! empty($_REQUEST['a']) )
$_REQUEST['a'] = str_match( $_REQUEST['a'], 'a-zA-Z0-9' );
else
$_REQUEST['a'] = 'default';
?>
terry dot greenlaw at logicalshift dot com ¶
19 years ago
Here's a simpler "simplest" way to toggle through a set of 1..n colors for web backgrounds:
<?php
$colours = array('#000000', '#808080', '#A0A0A0', '#FFFFFF');
// Get a colour
$color = next($colors) or $color = reset($colors);
?>
The code doesn't need to know anything about the number of elements being cycled through. That way you won't have to tracking down all the code when changing the number of colors or the color values.
james dot d dot baker at gmail dot com ¶
18 years ago
<?php
/*
Written By James Baker, May 27th 2005
sentenceCase($string);
$string: The string to convert to sentence case.
Converts a string into proper sentence case (First letter of each sentance capital, all the others smaller)
Example Usage:
echo sentenceCase("HELLO WORLD!!! THIS IS A CAPITALISED SENTENCE. this isn't.");
Returns:
Hello world!!! This is a capitalised sentence. This isn't.
*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
mike "eyes" moe ¶
16 years ago
Here is a truly random string generator it uses the most common string functions it will work on anywhere.
<?php
function random_string($max = 20){
$chars = explode(" ", "a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9");
for($i = 0; $i < $max; $i++){
$rnd = array_rand($chars);
$rtn .= base64_encode(md5($chars[$rnd]));
}
return substr(str_shuffle(strtolower($rtn)), 0, $max);
}
?>
rh at richardhoward dot net ¶
18 years ago
<?php
/**
Utility class: static methods for cleaning & escaping untrusted (i.e.
user-supplied) strings.
Any string can (usually) be thought of as being in one of these 'modes':
pure = what the user actually typed / what you want to see on the page /
what is actually stored in the DB
gpc = incoming GET, POST or COOKIE data
sql = escaped for passing safely to RDBMS via SQL (also, data from DB
queries and file reads if you have magic_quotes_runtime on--which
is rare)
html = safe for html display (htmlentities applied)
Always knowing what mode your string is in--using these methods to
convert between modes--will prevent SQL injection and cross-site scripting.
This class refers to its own namespace (so it can work in PHP 4--there is no
self keyword until PHP 5). Do not change the name of the class w/o changing
all the internal references.
Example usage: a POST value that you want to query with:
$username = Str::gpc2sql($_POST['username']);
*/
//This sets SQL escaping to use slashes; for Sybase(/MSSQL)-style escaping
// ( ' --> '' ), set to true.
define('STR_SYBASE', false);
class Str {
function gpc2sql($gpc, $maxLength = false)
{
return Str::pure2sql(Str::gpc2pure($gpc), $maxLength);
}
function gpc2html($gpc, $maxLength = false)
{
return Str::pure2html(Str::gpc2pure($gpc), $maxLength);
}
function gpc2pure($gpc)
{
if (ini_get('magic_quotes_sybase'))
$pure = str_replace("''", "'", $gpc);
else $pure = get_magic_quotes_gpc() ? stripslashes($gpc) : $gpc;
return $pure;
}
function html2pure($html)
{
return html_entity_decode($html);
}
function html2sql($html, $maxLength = false)
{
return Str::pure2sql(Str::html2pure($html), $maxLength);
}
function pure2html($pure, $maxLength = false)
{
return $maxLength ? htmlentities(substr($pure, 0, $maxLength))
: htmlentities($pure);
}
function pure2sql($pure, $maxLength = false)
{
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return (STR_SYBASE)
? str_replace("'", "''", $pure)
: addslashes($pure);
}
function sql2html($sql, $maxLength = false)
{
$pure = Str::sql2pure($sql);
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return Str::pure2html($pure);
}
function sql2pure($sql)
{
return (STR_SYBASE)
? str_replace("''", "'", $sql)
: stripslashes($sql);
}
}
?>
administrador(ensaimada)sphoera(punt)com ¶
18 years ago
I've prepared this simple function to obtain a string delimited between tags (not only XML tags!). Anybody needs something like this?.
<?php
function get_string_between($string, $start, $end){
$string = " ".$string;
$ini = strpos($string,$start);
if ($ini == 0) return "";
$ini += strlen($start);
$len = strpos($string,$end,$ini) - $ini;
return substr($string,$ini,$len);
}
$string = "this [custom] function is useless!!";
echo get_string_between($string,"[","]");
// must return "custom";
?>
more functions at http://www.sphoera.com
admin at rotarymulundeast dot org ¶
17 years ago
Here's an easier way to find nth...
function nth($numbex){
if ($numbex%10 == 1 && $numbex%100 != 11) $sth='st';
elseif ($numbex%10 == 2 && $numbex%100 != 12) $sth='nd';
elseif ($numbex%10 == 3 && $numbex%100 != 13) $sth='rd';
else $sth = 'th';
return $sth;
}
there is is no need to check if the user has entered a non-integer as we may be using this function for expressing variables as well eg. ith value of x , nth root of z ,etc...
m ¶
16 years ago
Regarding the code for the function beginsWith($str, $sub), I found that it has problems when only one character is present after the string searched for. I found that this works better instead:
<?php
function beginsWith($str, $sub) {
return (strncmp($str, $sub, strlen($sub)) == 0);
}
?>
webmaster at cafe-clope dot net ¶
18 years ago
A comprehensive concatenation function, that works with array and strings
<?php
function str_cat() {
$args = func_get_args() ;
// Asserts that every array given as argument is $dim-size.
// Keys in arrays are stripped off.
// If no array is found, $dim stays unset.
foreach($args as $key => $arg) {
if(is_array($arg)) {
if(!isset($dim))
$dim = count($arg) ;
elseif($dim != count($arg))
return FALSE ;
$args[$key] = array_values($arg) ;
}
}
// Concatenation
if(isset($dim)) {
$result = array() ;
for($i=0;$i<$dim;$i++) {
$result[$i] = '' ;
foreach($args as $arg)
$result[$i] .= ( is_array($arg) ? $arg[$i] : $arg ) ;
}
return $result ;
} else {
return implode($args) ;
}
}
?>
A simple example :
<?php
str_cat(array(1,2,3), '-', array('foo' => 'foo', 'bar' => 'bar', 'noop' => 'noop')) ;
?>
will return :
Array (
[0] => 1-foo
[1] => 2-bar
[2] => 3-noop
)
More usefull :
<?php
$myget = $_GET ; // retrieving previous $_GET values
$myget['foo'] = 'b a r' ; // changing one value
$myget = str_cat(array_keys($myget), '=', array_map('rawurlencode', array_values($myget))) ;
$querystring = implode(ini_get('arg_separator.output'), $myget)) ;
?>
will return a valid querystring with some values changed.
Note that <?php str_cat('foo', '&', 'bar') ; ?> will return 'foo&bar', while <?php str_cat(array('foo'), '&', 'bar') ; ?> will return array(0 => foo&bar)
Tomek Rychtyk ¶
12 years ago
Get the intersection of two strings using array_intersect
<?php
function string_intersect($string1, $string2)
{
$array1 = $array2 = array();
for($i = 0, $j = 0, $s1_len = strlen($string1), $s2_len = strlen($string2);($i < $s1_len) || ($j < $s2_len); $i++, $j++) {
if($i < $s1_len) {
$array1[] = $string1[$i];
}
if($j < $s2_len) {
$array2[] = $string2[$j];
}
}
return implode('', array_intersect($array1, $array2));
}
?>
For more advanced comparison you can use array_uintersect as well.
