Being able to put php directives in httpd.conf and have them work on a per-directory or per-vitual host basis is just great. Now there's another aspect which might be worth being aware of:
A php.ini directive put into your apache conf file applies to php when it runs as an apache module (i.e. in a web page), but NOT when it runs as CLI (command-line interface).
Such feature that might be unwanted by an unhappy few, but I guess most will find it useful. As far as I'm concerned, I'm really happy that I can use open_basedir in my httpd.conf file, and it restricts the access of web users and sub-admins of my domain, but it does NOT restrict my own command-line php scripts...
Como mudar as configurações
Executando PHP como módulo do Apache
Quando usar o PHP como módulo do Apache, você pode mudar as configurações usando diretivas nos arquivos de configuração do Apache (ex.: httpd.conf e .htaccess). Você precisará de privilégios "AllowOverride Options" ou "AllowOverride All" para fazer isso.
Há várias diretivas do Apache que permitem que você
mude a configuração do PHP de dentro dos arquivos de configuração
do Apache. Para uma lista de quais diretivas são
PHP_INI_ALL, PHP_INI_PERDIR,
or PHP_INI_SYSTEM, olhe no apêndice
Lista de diretivas do arquivo php.ini.
-
php_valuenomevalor -
Define o valor da diretiva especificada. Pode ser usado apenas com diretivas do tipo
PHP_INI_ALLePHP_INI_PERDIR. Para limpar um valor definido anteriormente, use o valornone.Nota: Não use
php_valuepara definir valores booleanos. A diretivaphp_flagdeve ser usada (veja abaixo). -
php_flagnomeon|off -
Usado para definir uma diretiva de configuração booleana. Pode ser usada apenas com diretivas dos tipos
PHP_INI_ALLePHP_INI_PERDIR. -
php_admin_valuenomevalor -
Define o valor da diretiva especificada. Essa diretiva não pode ser usada em arquivos .htaccess. Qualquer tipo de diretiva definido com
php_admin_valuenão pode ser sobrescrito pelo .htaccess ou pela função ini_set(). Para limpar um valor definido anteriormente, use o valornone. -
php_admin_flagnomeon|off -
Usado para definir uma diretiva de configuração booleana. Essa diretiva não pode ser usada em arquivos .htaccess. Qualquer tipo de diretiva definido com
php_admin_flagnão pode ser sobrescrito pelo .htaccess ou pela função ini_set().
Exemplo #1 Exemplo de configuração do Apache
<IfModule mod_php5.c> php_value include_path ".:/usr/local/lib/php" php_admin_flag engine on </IfModule> <IfModule mod_php4.c> php_value include_path ".:/usr/local/lib/php" php_admin_flag engine on </IfModule>
Cuidado
Constantes PHP não existem fora do PHP. Por exemplo, no
arquivo httpd.conf você não pode usar constantes do PHP
como E_ALL ou E_NOTICE
para definir a diretiva error_reporting,
já que elas não terão significado algum e serão avaliadas como
0. Ao invés disso, use os valores de bitmask associados.
Essas constantes podem ser usados no php.ini
Mudando configuração do PHP através do registro do Windows
Quando executar o PHP no Windows, os valores de configuração podem ser
modificados para cada diretório, usando o registro do Windows. Os
valores de configuração são armazenados na chave de registro
HKLM\SOFTWARE\PHP\Per Directory Values,
nas sub-chaves correspondentes aos caminhos dos diretórios. Por exemplo,
valores para o diretório c:\inetpub\wwwroot estariam
armazenados na chave
HKLM\SOFTWARE\PHP\Per Directory Values\c\inetpub\wwwroot.
As configurações para o diretório estariam ativas para qualquer script rodando
nesse diretório ou qualquer subdiretório dele. Os valores na chave
devem ter o nome da diretiva de configuração do PHP e um
valor string. Constantes PHP nos valores não são parseados.
Entretanto, apenas valores de configuração modificáveis no
PHP_INI_USER podem ser definidos
desta forma, valores PHP_INI_PERDIR não podem.
Outras interfaces para PHP
Independente de como você execute PHP, você pode mudar certos valores durante a execução de seus scripts através da função ini_set(). Veja a documentação na página ini_set() para mais informações.
Se você estiver interessado na lista completa das configurações definidas no seu sistema com os valores atuais, você pode executar a função phpinfo(), e revisar a página resultante. Você pode também acessar os valores de configurações de diretivas individuais em tempo de execução usando as funções ini_get() ou get_cfg_var().
add a note
User Contributed Notes 13 notes
contrees.du.reve at gmail dot com ¶
16 years ago
nick at vistaworks dot net ¶
11 years ago
On Windows, as the documentation above states, you cannot set max_upload_filesize and post_max_size in the registry, because they are PHP_INI_PERDIR.
Confusingly, however, is the fact that phpinfo() will show your changes if you do add those to the regsitry, as if they were taking effect. However, the upload size is *not* changed, regardless of what phpinfo() reports.
I believe the reading of registry values and override happen 'too late' in the request processing, ie, after the file has already been uploaded and rejected.
In a perfect world, phpinfo() would recognize this and not report the overridden values, which is very confusing.
Anteaus ¶
9 years ago
One of the most serious problems here is that it is hard to determine programmatically which of three or more possible configuration methods (php.ini, .user.ini, .htaccess) should be used on any given hosting company's server.
The worst outcome is if an install.php routine attempts to set .htaccess directives on a cgi-mode server, in which case the outcome is usually a '500' crash. Once in that situation the php installation routine cannot be rerun to correct the problem, so you effectively have a hosting lockout situation which can only be corrected by manual intervention.
Woody/mC ¶
16 years ago
@ pgl: As the documentation says:
"To clear a previously set value use none as the value."
Works fine for me.
ohcc at 163 dot com ¶
10 years ago
You will fail if you try to change configuration settings of PHP with the php_value directive in Apache 2.4.
rohitkumar at cftechno dot com ¶
12 years ago
Open php.ini from c:/php in your text editor
If you installed Apache in the default location, the path should
be "C:\Program Files\Apache Software Foundation\Apache2.2\htdocs". If you installed
it elsewhere, find the htdocs folder and type its path:
doc_root = "C:\Program Files\Apache Software Foundation\Apache2.2\htdocs"
Just a little further down in the file, look for the line that begins with remove the semicolon from the start of the extension_
dir, and set it so that it points to the ext subfolder of your PHP folder:
extension_dir = "C:\PHP\ext"
These are optional extensions to PHP, disabled by default. We
want to enable the MySQL extension so that PHP can communicate with MySQL.
To do this, remove the semicolon from the start of the php_mysqli.dll line:
extension=php_mysqli.dll
note - php_mysqli, not php_mysql
Keep scrolling even further down in the file, and look for a line that starts with
;session.save_path. Once again, remove the semicolon to enable this line,
and set it to your Windows Temp folder:
session.save_path = "C:\Windows\Temp"
Browse to the conf subfolder in your Apache
installation folder (by default, C:\Program Files\Apache Software
Foundation\Apache2.2\conf), and select the httpd.conf file located there. In order
to make this file visible for selection, you’ll need to select All Files (*.*) from the
file type drop-down menu at the bottom of the Open window.
Look for the existing line in this file that begins with DirectoryIndex, shown
here:
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
This line tells Apache which filenames to use when it looks for the default page
for a given directory. Add index.php to the end of this line:
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
All of the remaining options in this long and intimidating configuration file
should have been set up correctly by the Apache install program. All you need
to do is add the following lines to the very end of the file:
LoadModule php5_module "C:/PHP/php5apache2_2.dll"
AddType application/x-httpd-php .php
PHPIniDir "C:/PHP"
Make sure the LoadModule and PHPIniDir lines point to your PHP installation
directory, and note the use of forward slashes (/) instead of backslashes (\) in
the paths.
Save your changes and Restart Apache using the Apache Service Monitor system tray icon. If all is
well, Apache will start up again without complaint.
user at NOSPAM dot example dot com ¶
12 years ago
PHP Constants will work with php_value; for example:
php_value error_reporting 30711 #bitmask is the same as
php_value error_reporting "E_ALL & ~E_STRICT & ~E_NOTICE" #string of constants
hyponiq at gmail dot com ¶
15 years ago
Running PHP under Apache poses a major problem when it comes to per-directory configuration settings for PHP. In Apache virtual hosting, only a master PHP configuration file (i.e. php.ini) is parsed at run-time per PHP script. Under IIS 6.0 or greater, you can include per-directory PHP configuration files to override or overwrite the master configuration settings. The issue here, however, is having Apache virtual hosts override/overwrite master settings; not what IIS can do.
So, there are two possible solutions. The first solution is described in this section and uses the Apache configuration settings php_value, php_flag, php_admin_value, and php_admin_flag. In that, each virtual host which you'd like to have certain configuration settings changed must have these directives set (and that is for each PHP configuration setting). This, to me, is the more viable solution, although it is time-consuming and mentally taxing.
The other possible solution is to set the PHPRC environment variable. To my knowledge, all implementations of Apache HTTPD allow for the SetEnv directive to set the PHPRC variable per-virtual-host. What that does is tell PHP to look in the specified location for that virtual host's configuration settings file (i.e. "C:/path/to/custom/php.ini"). The only downside to this tactic is that EVERY virtual host's custom php.ini file must contain all set parameters. In other words, every single PHP configuration directive you have set in the master php.ini file must ALSO be set in per-virtual-host configuration settings. Doesn't that suck? It seems rather redundant to me (and completely defeats the purpose) that you have to include all configuration settings OVER AND OVER AGAIN.
The great thing about per-directory configuration settings (when they're implemented correctly) is that PHP already has the master settings pre-loaded and the per-directory settings (which may only ammount to one directive in difference) can be loaded per request and, thus, there is less over-head.
There really is more to this topic than that, which is why I blogged a rather lengthy and detailed article here: http://hyponiq.blogspot.com/2009/02/apache-php-multiple-phpini.html This information is meant to help users and administrators. I highly suggest it be read if anyone has any questions on Apache and PHP configurations. I have included some examples that illustrate the two possible solutions, as well. I did my best to research everything before I wrote the article.
I hope this helps!
==== 10-FEB-09: ====
I must add a little more information:
I've done some thorough testing on my PC as to the PHPRC environment variable set by the Apache directive SetEnv. It seems to me that this variable is completely disregarded using that directive. I tried everything and can only come to the conclusion that either A) I did something very wrong, or B) that it simply doesn't work as expected.
The former solution, however, does work magically! So, to expand on my previous post, the only real and viable solution to this problem is to use the php_value, php_flag, php_admin_value and php_admin_flag directives in your virtual hosts configurations.
Once again, it can be very boring! But it does work.
cawoodm at gmail dot com ¶
14 years ago
With IIS it can become confusing that changes to php.ini are ineffective. It seems it is necessary to restart the application pool for the changes to be seen. It would be great if this was not necessary - I am sure I have worked with systems where php.ini changes were immediately effectvie.
andy at ddtechnologies dot com ¶
10 years ago
Registry Key Handling Through PHP:
This is an ready to use code. You just need to copy this code into a PHP file.
//php Code starts from here......
//Reading the Registry
$Wshshell= new COM('WScript.Shell');
$data= $Wshshell->regRead('HKEY_LOCAL_MACHINE\SOFTWARE\7-Zip\path');
echo "Data is::".$data;
//Function for writing to the registry.
function registry_write($folder, $key, $value, $type="REG_SZ")
{
$WshShell = new COM("WScript.Shell");
$registry = "HKEY_LOCAL_MACHINE\\SOFTWARE\\" . $folder . "\\" . $key;
try{
$result = $WshShell->RegWrite($registry, $value, $type);
echo "Entry is Successfully written at:".$registry;
return($result);
}
catch(Exception $e){
echo "Some Exception in Registry writing".$e;
}
return false;
}
// Function to deleting from the Register Entry.
function registry_delete($folder, $key, $value, $type="REG_SZ")
{
$WshShell = new COM("Wscript.shell");
$registry = "HKEY_LOCAL_MACHINE\\SOFTWARE\\" . $folder . "\\" . $key;
try{
$result = $WshShell->RegDelete($registry);
echo $key." is Successfully deleted from HKEY_LOCAL_MACHINE\\SOFTWARE\\" . $folder ;
return($result);
}
catch(Exception $e){
echo "Some Exception with the code::".$e;
}
return false;
}
//Here 7-ZIP is taken as a example.
$folder = "7-ZIP";
$key = "Key_name";
$value = "Key_Value";
registry_write($folder,$key,$value);
//registry_delete($folder,$key,$value);
?>
...
-------------------------------------------------------------------------------------
http://herobot.net
Anonymous ¶
12 years ago
For Mac users (Leopard/Tiger/Lion) it's worth knowing exactly where your httpd.conf and php.ini ares picked up, but, out of the box, these are defined only in the compiler settings as defaults.
The httpd binary was compiled with default settings of
SERVER_CONFIG_FILE="/private/etc/apache2/httpd.conf"
meaning starting apache using apachectl picks up this httpd.conf without it being specified on the command line via the org.apache.httpd.plist file is /System/Library/LaunchDaemons.
Again, the default httpd.conf does not contain a PHPIniDir, and locates php.ini via libphp5.so in /etc - you would need to create one here (using one of the php.ini.default templates if you want).
It's worth changing the PHPIniDir setting in httpd.conf setting to eg.:
Configuration File /usr/local/php5/lib/php.ini
so you know exactly which php.ini is being used at all times.
phpinfo() will then advise you that it's using this file.
abu dot ztoko1 at gmail dot com ¶
6 years ago
Simply desire to say your article is as astonishing. The clearness in your post is simply spectacular and i can assume you’re an expert on this subject. Well with your permission allow me to grab your RSS feed to keep updated with forthcoming post. Thanks a million and please carry on the rewarding work.
http://ztoko.net/sandal/
self at pabloviquez dot com ¶
14 years ago
Note that, changing the PHP configuration via the windows registry will set the new values using php_admin_value. This makes that you cannot override them on runtime.
So for example, if you set the include_path on the windows registry and then you call the set_include_path function in your application, it will return false and won't change the include_path.
