If you'd like to understand pack/unpack. There is a tutorial here in perl, that works equally well in understanding it for php:
http://perldoc.perl.org/perlpacktut.html
(PHP 4, PHP 5, PHP 7, PHP 8)
pack — Packt Daten in eine binäre Zeichenkette
Packt die angegebenen Argumente unter Beachtung von
format
in eine binäre Zeichenkette.
Die Idee für diese Funktion entstammt Perl. Alle Formatierungs-Anweisungen funktionieren genau wie dort, allerdings fehlen in PHP einige Format-Codes von Perl (z. B. "u").
Beachten sie, dass der Unterschied zwischen vorzeichenlosen und vorzeichenbehafteten Werten nur Einfluss auf die Funktion unpack() hat, wogegen die Funktion pack() bei vorzeichenlosen und vorzeichenbehafteten Format-Codes dasselbe Ergebnis liefert.
format
Die Zeichenkette format
besteht aus
Format-Codes, gefolgt von einem optionalen Wiederholungs-Argument.
Dieses Argument kann ein ganzzahliger Wert sein oder ein
*
für Wiederholung bis ans Ende der Daten. Bei den
Format-Codes a, A, h und H gibt das Wiederholungs-Argument an, wie
viele gleiche Zeichen folgen. Im Zusammenhang mit "@" gibt das
Wiederholungs-Argument die absolute Position an, ab der das nächste
Zeichen steht. Bei allen anderen steht der Wiederholungs-Zähler für die
Anzahl der benutzten Daten-Argumente, die in die sich ergebende binäre
Zeichenkette gepackt werden sollen.
Zurzeit sind folgende Formate implementiert:
Code | Beschreibung |
---|---|
a | mit NUL gefüllte Zeichenkette |
A | mit Leerzeichen gefüllte Zeichenkette |
h | Hex-Zeichenkette, unterer Halbwert zuerst |
H | Hex-Zeichenkette, oberer Halbwert zuerst |
c | vorzeichenbehaftetes Zeichen |
C | vorzeichenloses Zeichen |
s | vorzeichenbehafteter Short-Typ (immer 16 Bit, Byte-Folge maschinenabhängig) |
S | vorzeichenloser Short-Typ (immer 16 Bit, Byte-Folge maschinenabhängig) |
n | vorzeichenloser Short-Typ (immer 16 Bit, Byte-Folge Big-Endian) |
v | vorzeichenloser Short-Typ (immer 16 Bit, Byte-Folge Little-Endian) |
i | vorzeichenbehaftete Ganzzahl (Größe und Byte-Folge maschinenabhängig) |
I | vorzeichenlose Ganzzahl (Größe und Byte-Folge maschinenabhängig) |
l | vorzeichenbehafteter Long-Typ (immer 32 Bit, Byte-Folge maschinenabhängig) |
L | vorzeichenloser Long-Typ (immer 32 Bit, Byte-Folge maschinenabhängig) |
N | vorzeichenloser Long-Typ (immer 32 Bit, Byte-Folge Big-Endian) |
V | vorzeichenloser Long-Typ (immer 32 Bit, Byte-Folge Little-Endian) |
q | vorzeichenbehafteter Long-Long-Typ (immer 64 Bit, maschinenabhängig) |
Q | vorzeichenloser Long-Long-Typ (immer 64 Bit, maschinenabhängig) |
J | vorzeichenloser Long-Long-Typ (immer 64 Bit, Byte-Folge Big-Endian) |
P | vorzeichenloser Long-Long-Typ (immer 64 Bit, Byte-Folge Little-Endian) |
f | Gleitkommazahl (maschinenabhängige Größe und Wiedergabe) |
g | Gleitkommazahl (maschinenabhängige Größe, Byte-Folge Little-Endian) |
G | Gleitkommazahl (maschinenabhängige Größe, Byte-Folge Big-Endian) |
d | Double-Typ (maschinenabhängige Größe und Wiedergabe) |
e | Double-Typ (maschinenabhängige Größe, Byte-Folge Little-Endian) |
E | Double-Typ (maschinenabhängige Größe, Byte-Folge Big-Endian) |
x | NUL Byte |
X | geht in der Zeichenkette ein Byte rückwärts |
Z | NUL-aufgefüllte Zeichenkette (neu in PHP 5.5) |
@ | NUL-Auffüllung bis zur absoluten Position |
values
Gibt die Daten als binäre Zeichenkette zurück. Im Fehlerfall wird false
zurückgegeben.
Version | Beschreibung |
---|---|
8.0.0 |
Diese Funktion gibt bei einem Fehler nicht mehr false zurück.
|
7.2.0 | float- und double-Typen unterstützen sowohl Big-Endian als auch Little-Endian. |
7.0.15, 7.1.1 | Die Codes "e", "E", "g" und "G" wurden hinzugefügt, um die Byte-Folgen-Unterstützung für float und double zu ermöglichen. |
Beispiel #1 pack()-Beispiel
<?php
$binaerdaten = pack("nvc*", 0x1234, 0x5678, 65, 66);
?>
Die sich daraus ergebende binäre Zeichenkette ist sechs Bytes lang und enthält die Byte-Folge 0x12, 0x34, 0x78, 0x56, 0x41, 0x42.
Es ist zu beachten, dass PHP int-Werte intern als
vorzeichenbehaftete Werte einer maschinenabhängigen Größe speichert (C-Typ
long
). Integer-Literale und Operationen, die Zahlen
außerhalb der Grenzen des Typs int ergeben, werden als
float gespeichert. Wenn diese Floats als Integer gepackt
werden, werden sie zuerst in den Integer-Typ gewandelt. Dies kann u.U. ein
nicht erwünschtes Byte-Muster ergeben.
Der wichtigste Fall ist das Packen vorzeichenloser Zahlen, die als
int-Typ darstellbar wären, wenn dieser vorzeichenlos wäre.
Auf Systemen wo der Typ int 32 Bit groß ist, resultiert die
Umwandlung üblicherweise im selben Byte-Muster, wie wenn der
int vorzeichenlos wäre (allerdings ist das auf
implementierungsspezifische Konvertierungen von vorzeichenlosen in
vorzeichenbehaftete Zahlen gemäß dem C-Standard angewiesen). Auf Systemen,
wo der Typ int 64 Bit groß ist, hat float
vermutlich keine Mantisse, die groß genug ist, um den Wert ohne
Genauigkeitsverlust zu speichern. Haben diese Systeme ebenfalls einen
nativen 64bit-C-int
-Typ (die meisten UNIX-artigen
Systeme haben das nicht), dann ist die einzige Möglichkeit, das Packformat
I
im oberen Bereich zu nutzen, negative
int-Werte mit der gleichen Byte-Darstellung wie die
gewünschten vorzeichenlosen Werte zu erzeugen.
If you'd like to understand pack/unpack. There is a tutorial here in perl, that works equally well in understanding it for php:
http://perldoc.perl.org/perlpacktut.html
A helper class to convert integer to binary strings and vice versa. Useful for writing and reading integers to / from files or sockets.
<?php
class int_helper
{
public static function int8($i) {
return is_int($i) ? pack("c", $i) : unpack("c", $i)[1];
}
public static function uInt8($i) {
return is_int($i) ? pack("C", $i) : unpack("C", $i)[1];
}
public static function int16($i) {
return is_int($i) ? pack("s", $i) : unpack("s", $i)[1];
}
public static function uInt16($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("n", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("v", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("S", $i);
}
return is_array($i) ? $i[1] : $i;
}
public static function int32($i) {
return is_int($i) ? pack("l", $i) : unpack("l", $i)[1];
}
public static function uInt32($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("N", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("V", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("L", $i);
}
return is_array($i) ? $i[1] : $i;
}
public static function int64($i) {
return is_int($i) ? pack("q", $i) : unpack("q", $i)[1];
}
public static function uInt64($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("J", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("P", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("Q", $i);
}
return is_array($i) ? $i[1] : $i;
}
}
?>
Usage example:
<?php
Header("Content-Type: text/plain");
include("int_helper.php");
echo int_helper::uInt8(0x6b) . PHP_EOL; // k
echo int_helper::uInt8(107) . PHP_EOL; // k
echo int_helper::uInt8("\x6b") . PHP_EOL . PHP_EOL; // 107
echo int_helper::uInt16(4101) . PHP_EOL; // \x05\x10
echo int_helper::uInt16("\x05\x10") . PHP_EOL; // 4101
echo int_helper::uInt16("\x05\x10", true) . PHP_EOL . PHP_EOL; // 1296
echo int_helper::uInt32(2147483647) . PHP_EOL; // \xff\xff\xff\x7f
echo int_helper::uInt32("\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL; // 2147483647
// Note: Test this with 64-bit build of PHP
echo int_helper::uInt64(9223372036854775807) . PHP_EOL; // \xff\xff\xff\xff\xff\xff\xff\x7f
echo int_helper::uInt64("\xff\xff\xff\xff\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL; // 9223372036854775807
?>
Note that the the upper command in perl looks like this:
$binarydata = pack ("n v c*", 0x1234, 0x5678, 65, 66);
In PHP it seems that no whitespaces are allowed in the first parameter. So if you want to convert your pack command from perl -> PHP, don't forget to remove the whitespaces!
If you need to unpack a signed short from big-endian or little-endian specifically, instead of machine-byte-order, you need only unpack it as the unsigned form, and then if the result is >= 2^15, subtract 2^16 from it.
And example would be:
<?php
$foo = unpack("n", $signedbigendianshort);
$foo = $foo[1];
if($foo >= pow(2, 15)) $foo -= pow(2, 16);
?>
/* Convert float from HostOrder to Network Order */
function FToN( $val )
{
$a = unpack("I",pack( "f",$val ));
return pack("N",$a[1] );
}
/* Convert float from Network Order to HostOrder */
function NToF($val )
{
$a = unpack("N",$val);
$b = unpack("f",pack( "I",$a[1]));
return $b[1];
}
Coder's example is basically an explanation of bindec() and decbin(), not pack() and unpack().
Here's some code to convert a string binary expression into its binary-string equivalent and vice versa.
(Would be even simpler if pack/unpack offered a 'b' format code....)
<?php
function bin2bstr($input)
// Convert a binary expression (e.g., "100111") into a binary-string
{
if (!is_string($input)) return null; // Sanity check
// Pack into a string
return pack('H*', base_convert($input, 2, 16));
}
function bstr2bin($input)
// Binary representation of a binary-string
{
if (!is_string($input)) return null; // Sanity check
// Unpack as a hexadecimal string
$value = unpack('H*', $input);
// Output binary representation
return base_convert($value[1], 16, 2);
}
// Returns string(3) "ABC"
var_dump(bin2bstr('01000001 01000010 01000011'));
// Returns string(24) "010000010100001001000011"
var_dump(bstr2bin('ABC'));
?>
Be aware of format code H always padding the 0 for byte-alignment to the right (for odd count of nibbles).
So pack("H", "7") results in 0x70 (ASCII character 'p') and not in 0x07 (BELL character)
as well as pack("H*", "347") results in 0x34 ('4') and 0x70 ('p') and not 0x03 and 0x47.
a cool function to converrt numbers to Persian numbers(utf-8)
origin: http://www.farsiweb.info/jalali/jalali.phps
function farsinum($str)
{
$ret = "";
for ($i = 0; $i < strlen($str); ++$i) {
$c = $str[$i];
if( $c >= '0' && $c <= '9' )
$out .= pack("C*", 0xDB, 0xB0 + $c);
else
$ret .= $c;
}
return $ret;
}
<?PHP
function ntohs($port) {
$b=pack("N", $port);
return substr($b,2,2);
}
?>
I've spent a number of hours (n>=2) finding how to do this,
it works like the c function 'ntohs', used for eg the socks5 proxy protocol.
Even though in a 64-bit architecure intval(6123456789) = 6123456789, and sprintf('%b', 5000000000) = 100101010000001011111001000000000
pack will not treat anything passed to it as 64-bit. If you want to pack a 64-bit integer:
<?php
$big = 5000000000;
$left = 0xffffffff00000000;
$right = 0x00000000ffffffff;
$l = ($big & $left) >>32;
$r = $big & $right;
$good = pack('NN', $l, $r);
$urlsafe = str_replace(array('+','/'), array('-','_'), base64_encode($good));
//done!
//rebuild:
$unurl = str_replace(array('-','_'), array('+','/'), $urlsafe);
$binary = base64_decode($unurl);
$set = unpack('N2', $tmp);
print_r($set);
$original = $set[1] << 32 | $set[2];
echo $original, "\\r\\n";
?>
results in:
Array
(
[1] => 1
[2] => 705032704
)
5000000000
but ONLY on a 64-bit enabled machine and PHP distro.
You will get the same effect with
<?php
function _readInt($fp)
{
return unpack('V', fread($fp, 4));
}
?>
or unpack('N', ...) for big-endianness.
This is how I used pack to convert base2 to base64 since base_convert doesn't support base64
The base conversions don't work for long strings, which is why I convert 1 byte at a time
Hope this helps someone
function base2to64($base2) {
if ($remainbits = strlen($base2)%8) $base2 .= str_repeat('0',8-$remainbits);
$base64 = NULL;
for ($i=0;$i<strlen($base2);$i+=8) $base16 .= sprintf('%02x',bindec(sprintf('%08d',substr($base2,$i,8))));
return base64_encode(pack('H*',$base16));
}
function base64to2($base64) {
list($base16) = unpack('H*0',base64_decode($base64));
$base2 = NULL;
for ($i=0;$i<strlen($base16);$i++) $base2 .= sprintf('%04d',base_convert(substr($base16,$i,1),16,2));
return $base2;
}
pack()
h Hex string, low nibble first (not same hex2bin())
H Hex string, high nibble first (same hex2bin())
These two functions allow conversion between binary string and signed integer with possibility to give the bit length.
Usage:
<?php
echo si2bin(-10, 32);
11111111111111111111111111110110
echo si2bin(10, 32);
00000000000000000000000000001010
echo bin2si("11111111111111111111111111110110", 32);
-10
echo bin2si("00000000000000000000000000001010", 32);
10
// signed integer to binary
function si2bin($si, $bits=32)
{
if ($si >= -pow(2,$bits-1) and $si <= pow(2,$bits-1) )
{
if ($si >= 0) // positive or zero
{
$bin = base_convert($si,10,2);
// pad to $bits bit
$bin_length = strlen($bin);
if ($bin_length < $bits) $bin = str_repeat ( "0", $bits-$bin_length).$bin;
}
else // negative
{
$si = -$si-pow(2,$bits);
$bin = base_convert($si,10,2);
$bin_length = strlen($bin);
if ($bin_length > $bits) $bin = str_repeat ( "1", $bits-$bin_length).$bin;
}
return $bin;
}
}
// binary to signed integer
function bin2si($bin,$bits=32)
{
if (strlen($bin)==$bits)
{
if (substr($bin,0,1) == 0) // positive or zero
{
$si = base_convert($bin,2,10);
}
else // negative
{
$si = base_convert($bin,2,10);
$si = -(pow(2,$bits)-$si);
}
return $si;
}
}
?>
Using pack to write Arabic char(s) to a file.
<?php
$text = "㔆㘆㘆";
$text = mb_convert_encoding($text, "UCS-2BE", "HTML-ENTITIES");
$len = mb_strlen($text);
$bom = mb_convert_encoding("", "unicode", "HTML-ENTITIES");
$fp = fopen('text.txt', 'w');
fwrite($fp, pack('a2', $bom));
fwrite($fp, pack("a{$len}", $text));
fwrite($fp, pack('a2', $bom));
fwrite($fp, pack('a2', "\n"));
fclose($fp);
?>
You can use pack to strip the byte order mark (BOM) from a file.
For example, strip the UTF-8 BOM:
<?php
// Strips the UTF-8 mark: (hex value: EF BB BF)
function trimUTF8BOM($data){
if(substr($data, 0, 3) == pack('CCC', 239, 187, 191)) {
return substr($data, 3);
}
return $data;
}
?>
This function could be easily adjusted to match any byte order mark. Have a look at wikipedia for a full list of hex codes for each specific encoding.
- Gerard
If you're bugged by http://bugs.php.net/bug.php?id=5889 then you can try this:
Use igbinary-serialize if you don't mind a little overhead.
Or intarray (by the same person) if you don't mind using a slightly experimental package which may have problems sharing data between differently byte/bit ordered architectures.
I don't believe it would be too difficult to shove a serialize function and unserialize function in there if you rip out the code from igbinary for storing numeric arrays with the correct endianess. Looking at `igbinary_serialize32` and `igbinary_unserialize32` in igbinary.c it should be very easy to copy that functionality to intarray.c.
Take away the "<<0" though, that's just stupid :P
Ref: http://opensource.dynamoid.com/
When trying to create a ZIP file using the pack function - I experienced trouble with the "a" code - It converted all chars correct from the std. ASCII charset but not more language specific like ÆøÅ.
It seems that ZIP files do not use the same HEX for these as everything else does.
The fix was a quick workaround but you'll probably get the picture:
function UniHex($str) {
// æ ø å Æ Ø Å
//These are simply one HEX code being replaced by another to correct the issue
$except = array("E6"=>"91","F8"=>"9B","E5"=>"86","C6"=>"92","D8"=>"9D", "C5"=>"8F");
for($i = 0; $i < strlen($str); $i++) {
$hex = bin2hex(substr($str, $i, 1));
if ($except[strtoupper($hex)])
$hex = $except[strtoupper($hex)];
$return .= $hex;
}
return $return;
}
And then i replaced an "a100" code with "H".strlen(uniHex($mystring))
This is like i said a quick workaround, but if you find the real reason for this i'd be happy to see it
How to convert an integer to raw data, specifying the amount of bytes to convert to (will be padded with 0's):
public function toRaw($int, $bytes = 4)
{
$hex = dechex($int);
if (strlen($hex) % 2 != 0)
$hex = '0'. $hex;
$arr = str_split($hex, 2);
while (count($arr) < $bytes)
array_unshift($arr, 0);
$arr = array_map('hexdec', $arr);
$arr = array_map('chr', $arr);
return join('', array_reverse($arr));
}