The simplest way to get around the fact that max() won't give the key is array_search:
<?php
$student_grades = array ("john" => 100, "sarah" => 90, "anne" => 100);
$top_student = array_search(max($student_grades),$student_grades); // john
?>
This could also be done with array_flip, though overwriting will mean that it gets the last max value rather than the first:
<?php
$grades_index = array_flip($student_grades);
$top_student = $grades_index[max($student_grades)]; // anne
?>
To get all the max value keys:
<?php
$top_students = array_keys($student_grades,max($student_grades)); // john, anne
?>
max
(PHP 4, PHP 5, PHP 7, PHP 8)
max — La plus grande valeur
Description
Signature alternative (non supporté avec les arguments nommés) :
Si le premier et unique paramètre est un tableau, max() retourne la valeur la plus haute du tableau. Si au moins deux paramètres sont fournis, max() retourne la plus grosse de ces valeurs.
Note:
Les valeurs de différents types seront comparées en utilisant les règles de comparaison standard. Actuellement, une chaîne non numérique sera comparée à un entier, comme s'il s'agissait de la valeur
0, mais plusieurs chaîne de caractères non-numérique seront comparées de façon alphanumérique. La valeur actuelle retournée sera du même type que l'original et aucune conversion de type ne sera appliquée.
Attention
Soyez prudent lorsque vous passez des arguments avec des types différents, car max() peut produire des résultats imprévisibles.
Liste de paramètres
-
value -
Toute valeur comparable.
-
values -
Toute valeurs comparable.
-
value_array -
Un tableau contenant les valeurs.
Valeurs de retour
La fonction max() retourne la valeur du paramètre
considéré comme "supérieure" suivant la comparaison standard.
Si plusieurs valeurs de types différents sont évaluées comme étant égales
(i.e. 0 et 'abc'), la première fournie
à la fonction sera retournée.
Si un tableau vide est passé, alors false sera retourné et une erreur
E_WARNING sera émise.
Exemples
Exemple #1 Exemple avec max()
<?php
echo max(2, 3, 1, 6, 7); // 7
echo max(array(2, 4, 5)); // 5
// La chaîne 'hello', lors de la comparaison avec un entier, est traitée
// comme valant 0. Sachant que les deux valeurs sont égales,
// l'ordre fourni va déterminer le résultat
echo max(0, 'hello'); // 0
echo max('hello', 0); // hello
// Ici, nous comparons -1 < 0, aussi 'hello' est la plus grande valeur
echo max('hello', -1); // hello
// Avec plusieurs tableaux de tailles différentes, max retourne
// le plus long
$val = max(array(2, 2, 2), array(1, 1, 1, 1)); // array(1, 1, 1, 1)
// Plusieurs tableaux de même longueur sont comparés de la gauche vers la droite
// aussi, dans notre exemple : 2 == 2, but 5 > 4
$val = max(array(2, 4, 8), array(2, 5, 1)); // array(2, 5, 1)
// Si un tableau et un non-tableau sont fournis, le tableau sera toujours
// retourné, sachant que les comparaisons traitent les tableaux comme
// étant plus grand que n'importe quelle valeur
$val = max('string', array(2, 5, 7), 42); // array(2, 5, 7)
// Si un argument vaut NULL ou est un booléen, il sera comparé avec les autres
// valeurs en utilisant la règle FALSE < TRUE suivant les autres types concernés
// Dans l'exemple ci-dessous, -10 est traité comme valant TRUE dans la comparaison
$val = max(-10, FALSE); // -10
// D'un autre côté, 0 est traité comme valant FALSE, aussi, il est "plus petit que" TRUE
$val = max(0, TRUE); // TRUE
?>
add a note
User Contributed Notes 17 notes
keith at bifugi dot com ¶
7 years ago
ries at vantwisk dot nl ¶
15 years ago
I had several occasions that using max is a lot slower then using a if/then/else construct. Be sure to check this in your routines!
Ries
volch5 at gmail dot com ¶
10 years ago
max() (and min()) on DateTime objects compares them like dates (with timezone info) and returns DateTime object.
<?php
$dt1 = new DateTime('2014-05-07 18:53', new DateTimeZone('Europe/Kiev'));
$dt2 = new DateTime('2014-05-07 16:53', new DateTimeZone('UTC'));
echo max($dt1,$dt2)->format(DateTime::RFC3339) . PHP_EOL; // 2014-05-07T16:53:00+00:00
echo min($dt1,$dt2)->format(DateTime::RFC3339) . PHP_EOL; // 2014-05-07T18:53:00+03:00
?>
It works at least 5.3.3-7+squeeze17
Alex Rath ¶
14 years ago
Notice that whenever there is a Number in front of the String, it will be used for Comparison.
<?php
max('7iuwmssuxue', 1); //returns 7iuwmssuxu
max('-7suidha', -4); //returns -4
?>
But just if it is in front of the String
<?php
max('sdihatewin7wduiw', 3); //returns 3
?>
ReVo_ ¶
9 years ago
Sometimes you could need to get the max from an array which looks like this:
<?php
$arrTest = array(
array( "day" => 1, "b" => 10 ),
array( "day" => 2, "b" => 43 ),
array( "day" => 3, "b" => 2 ),
array( "day" => 4, "b" => -3 ),
array( "day" => 5, "b" => 4 ),
array( "day" => 6, "b" => -5 )
);
?>
all max functions i see around don't provide a way to get the max value of the values in (example) key "b"
<?php
function maxValueInArray($array, $keyToSearch)
{
$currentMax = NULL;
foreach($array as $arr)
{
foreach($arr as $key => $value)
{
if ($key == $keyToSearch && ($value >= $currentMax))
{
$currentMax = $value;
}
}
}
return $currentMax;
}
// array key
$value = maxValueInArray($arrTest, "b");
?>
output: 43
johnphayes at gmail dot com ¶
18 years ago
Regarding boolean parameters in min() and max():
(a) If any of your parameters is boolean, max and min will cast the rest of them to boolean to do the comparison.
(b) true > false
(c) However, max and min will return the actual parameter value that wins the comparison (not the cast).
Here's some test cases to illustrate:
1. max(true,100)=true
2. max(true,0)=true
3. max(100,true)=100
4. max(false,100)=100
5. max(100,false)=100
6. min(true,100)=true
7. min(true,0)=0
8. min(100,true)=100
9. min(false,100)=false
10. min(100,false)=false
11. min(true,false)=false
12. max(true,false)=true
sun at drupal dot org ¶
12 years ago
Note that max() throws a warning if the array is empty:
<?php
$a = array();
max($a);
// Warning: max(): Array must contain at least one element
?>
So make sure your data isn't empty.
harmor ¶
16 years ago
A way to bound a integer between two values is:
<?php
function bound($x, $min, $max)
{
return min(max($x, $min), $max);
}
?>
which is the same as:
<?php
$tmp = $x;
if($tmp < $min)
{
$tmp = $min;
}
if($tmp > $max)
{
$tmp = $max;
}
$y = $tmp;
?>
So if you wanted to bound an integer between 1 and 12 for example:
Input:
<?php
$x = 0;
echo bound(0, 1, 12).'<br />';
$x = 1;
echo bound($x, 1, 12).'<br />';
$x = 6;
echo bound($x, 1, 12).'<br />';
$x = 12;
echo bound($x, 1, 12).'<br />';
$x = 13;
echo bound($x, 1, 12).'<br />';
?>
Output:
1
1
6
12
12
michaelangel0 at mail.com ¶
16 years ago
Matlab users and others may feel lonely without the double argument output from min and max functions.
To have the INDEX of the highest value in an array, as well as the value itself, use the following, or a derivative:
<?php
function doublemax($mylist){
$maxvalue=max($mylist);
while(list($key,$value)=each($mylist)){
if($value==$maxvalue)$maxindex=$key;
}
return array("m"=>$maxvalue,"i"=>$maxindex);
}
?>
php at rijkvanwel dot nl ¶
13 years ago
To get the largest key in an array:
<?php
$array = array( 0 => 'first', 1=> 'second', /* ... */ 99 => 'nth' );
$max_key = max( array_keys( $array ) ); // 99
?>
blackmac01 at gmail dot com ¶
4 years ago
In response to: keith at bifugi dot com
If you want to find the specific key(s) that match the maximum value in an array where the values may be duplicated, you can loop through and perform a simple check:
<?php
# Example Array
$a = array(
'key1' => 100,
'key2' => 90,
'key3' => 100,
'key4' => 90,
);
# First get the maximum value
$max = max($a);
# Create a new array containing all keys which have the max value
foreach($a as $key => $val) {
if($val === $max) $b[] = $key;
}
# If you want a string list, just do this
$b = implode(' ', $b);
?>
This produces consistent results and will scale well in terms of performance, whereas functions like array_search and array_flip can lead to degraded performance when dealing with large amounts of data.
info at osworx dot net ¶
5 years ago
Be aware if a array like this is used (e.g. values from a shopping cart):
<?php
Array
(
[0] => 142,80
[1] => 39,27
[2] => 22,80
[3] => 175,80
)?>
The result will be: 39,27 and not - as expected - 175,80
So, to find the max value, use integer only like:
<?php
Array
(
[0] => 14280
[1] => 3927
[2] => 2280
[3] => 17580
)?>
and you will get the correct result: 17580
marcini ¶
14 years ago
Note that max() can compare dates, so if you write something like this:
<?php
$dates = array('2009-02-15', '2009-03-15');
echo max($dates);
?>
you will get: 2009-03-15.
levim at php dot net ¶
11 years ago
<?php
/**
* @param array $array
*
* @return int|null Returns the largest value of the array. Returns NULL if no
* integers are found.
*/
function array_max_recursive(array $array) {
$max = NULL;
$stack = array($array);
do {
$current = array_pop($stack );
foreach ($current as $value) {
if (is_array($value)) {
$stack[] = $value;
} elseif (filter_var($value, FILTER_VALIDATE_INT) !== FALSE) {
// max(NULL, 0) returns NULL, so cast it
$max = (int) max($max, $value);
}
}
} while (!empty($stack));
return $max;
}
?>
- This function is not actually recursive, but fulfills the requirement that it works on sub-arrays. I do this because PHP is not very good at recursion. I also did it because I enjoy doing things this way.
- It returns something of type int, never a string representation of an int. The exception is when you provide an array that does not contain any integers. It will then return NULL.
- It ignores non-array, non-int values.
toon dot baeyens at gmail dot com ¶
12 years ago
A little function for multi-dimensional arrays:
<?php
function amax($array){
if(is_array($array)){
foreach($array as $key => $value){
$array[$key] = amax($value);
}
return max($array);
}else{
return $array;
}
}
?>
Michael Blinn ¶
5 years ago
Be careful using max() with objects, as it returns a reference not a new object.
<?php
$min_date = date_create('2019-03-05');
$max_date = date_create('2019-03-06');
$date_by_reference = max($min_date, $max_date);
// $date_by_reference and $max_date are now the same object
echo '$max_date is ' . date_format($max_date, 'Y-m-d') . PHP_EOL; // '2019-03-06'
echo '$date_by_reference is ' . date_format($date_by_reference, 'Y-m-d') . PHP_EOL; // '2019-03-06'
date_add($date_by_reference, date_interval_create_from_date_string('1 days')); // Add 1 day to $date_by_reference, changes $max_date too
echo '$max_date is changed ' . date_format($max_date, 'Y-m-d') . PHP_EOL; // '2019-03-07'
echo '$date_by_reference is changed ' . date_format($date_by_reference, 'Y-m-d') . PHP_EOL; // '2019-03-07'
?>
